Filter
Top Products
8-90 C122-E003-02EN
GSWB
CHAPTER 8 CLI Operations
(4) See also
ip igmp snooping
(5) Examples
• Enables IGMP snooping in VLAN 2
• Disables IGMP snooping in VLAN 2
(6) Error Messages
• % Incomplete command.
Cause: Incomplete command input
Action: Enter the command string correctly.
• % Invalid input detected at '^' marker.
Cause: Invalid character detected at '^' marker in the entered command string
Action: Enter the command string correctly.
• Internal communication error.
Cause: An internal error occurred.
Action: Check the system status, and reenter the command. If the error occurs again,
collect unit information, configuration definition information, and the
information in different types of logs, and restart the unit. Alternatively,
contact a certified service engineer.
• igmp vlan is max regist.
Cause: 110 VLANs are specified for snooping.
Action: Disable unnecessary IGMP VLANs.
• Input parameter error.
Cause: An invalid parameter was specified.
Action: Specify the correct parameter.
switch(config)#vlan 2
switch(config-vlan)# ip igmp snooping vlan
switch(config-vlan)#
switch(config)#vlan 2
switch(config-vlan)# no ip igmp snooping vlan
switch(config-vlan)#