Filter
Top Products
8-194 C122-E003-02EN
GSWB
CHAPTER 8 CLI Operations
(5) Examples
Displayed items:
z Source Ports
- RX Only: Interface for transmission monitoring
- TX Only: Interface for reception monitoring
- Both: Interface for transmission/reception monitoring
z Destination Port: Interface of the monitoring result output destination
(6) Error Messages
• % Incomplete command.
Cause: Incomplete command input
Action: Enter the command string correctly.
• % Invalid input detected at '^' marker.
Cause: Invalid character detected at '^' marker in the entered command string
Action: Enter the command string correctly.
• System error.
Cause: An internal error occurred.
Action: Check the system status, and reenter the command. If the error occurs again,
collect unit information, configuration definition information, and the
information in different types of logs, and restart the unit. Alternatively,
contact a certified service engineer.
Switch# show monitor session
Source Ports:
RX Only : 19 GigabitEthernet 0/3,
20 GigabitEthernet 0/4
TX Only : None
Both : 21 GigabitEthernet 0/5
Destination Port : 17 GigabitEthernet 0/1