Filter
Top Products
C122-E003-02EN 3-67
MMB
3.2 System Menu
Table 3.44 Buttons in the [MMB#x] window
(1) Menu operation
[System] → [MMB] → [MMB#x ]
(2) GUI operation
1 Specify information to change the MMB status, and click the [Apply] button.
The specified information is then set to change the MMB status accordingly.
3.2.16 GSWB menu
The [GSWB] menu consists of the following two menus for the respective GSWB
units:
z [GSWB#0] to [GSWB#1]
This section describes these menus collectively as [GSWB#x] because they share the
same window format and operating methods.
3.2.16.1 GSWB#x window
The [GSWB#x] window displays the status of the GSWB#x board, and the board can
be controlled and its location LED can be specified from this window.
Note: Clearing the abnormal status of a GSWB enables its use during the next
reboot. If an error is detected again, the GSWB is placed back in the error
status.
Remarks: If the user is granted no appropriate privilege, the [Status Clear] button is
not displayed.
Voltage Current voltage reading
Threshold Warning
(Low/High)
Lower and upper limits of the warning-level voltage. If no limit is
set, "-" is displayed.
Critical
(Low/High)
Lower and upper limits of the critical-level voltage. If no limit is
set, "-" is displayed.
Button Description
Apply Specify control information, and click the [Apply] button to set the
specified information.
Cancel Click the [Cancel] button to revert to the original settings.
Item Description