Filter
Top Products
C122-E003-02EN 8-157
GSWB
8.3 Operation Commands
(6) Error Messages
• % Invalid input detected at '^' marker.
Cause: Invalid character detected at '^' marker in the entered command string
Action: Enter the command string correctly.
• Parameter error
Cause: Invalid <HOST> or [username]
Action: Specify a correct value.
• Permission denied.
Cause: Invalid password
Action: Enter the correct password.
• ssh: connect to address *.*.*.* port 22: Network is unreachable
Cause: The destination server cannot be connected.
Action: Check the network environment.
• ssh: connect to address *.*.*.* port 22: Connection refused
Cause: The destination server refused the attempted connection.
Action: Check the destination server status.
• ssh: connect to address *.*.*.* port 22: No route to host
Cause: The destination server cannot be connected.
Action: Check the destination server.
• ssh: connect to address *.*.*.* port 22: *
Cause: The destination server cannot be connected.
Action: Check the network connection to the destination server.
• Server authentication failure: *
Cause: The server cannot be connected due to authentication error.
Action: Check the destination server settings.
• Internal error:*
Cause: An internal error occurred.
Action: Check the system status, and reenter the command. If the error occurs again,
collect unit information, configuration definition information, and the
information in different types of logs, and restart the unit. Alternatively,
contact a certified service engineer.