Filter
Top Products
3-16
Cisco ASDM User Guide
OL-16647-01
Chapter 3 Defining Preferences and Using Configuration, Diagnostic, and File Management Tools
Diagnostic Tools
Modes
The following table shows the modes in which this feature is available:
Egress Traffic Selector
The Egress Traffic Selector dialog box lets you configure the egress interface, source and destination
hosts/networks, and source and destination port services for packet capture.
Fields
• Egress Interface—Specifies the egress interface name.
• Source Host/Network—Specifies the egress source host and network.
• Destination Host/Network—Specifies the egress destination hose and network.
• Protocol—Specifies the protocol type selected during the ingress configuration.
Modes
The following table shows the modes in which this feature is available:
Buffers
The Buffers dialog box lets you configure the packet size, buffer size, and whether to use the circular
buffer for packet capture.
Fields
• Packet Size—Specifies longest packet that the capture can hold. Use the longest size available to
capture as much information as possible.
• Buffer Size—Specifies the maximum amount of memory that the capture can use to store packets.
• Use circular buffer—Specifies whether to use the circular buffer to store packets. When the circular
buffer has used all of the buffer storage, the capture will write over the oldest packets first.
Modes
The following table shows the modes in which this feature is available:
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
• • • •—
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
• • • •—