Filter
Top Products
24-30
Cisco ASDM User Guide
OL-16647-01
Chapter 24 Configuring Application Layer Protocol Inspection
Service Policy Field Descriptions
–
Configure—Displays the Select HTTP Map dialog box, which lets you select a map name to
use for this protocol.
• ICMP—Enables application inspection for the ICMP protocol.
• ICMP Error—Enables application inspection for the ICMP Error protocol.
• ILS—Enables application inspection for the ILS protocol.
• IM—Enables application inspection for the IM protocol.
–
Configure—Displays the Select IM Map dialog box, which lets you select a map name to use
for this protocol.
• IPSec-Pass-Thru—Enables application inspection for the IPSec protocol.
–
Configure—Displays the Select IPSec Map dialog box, which lets you select a map name to
use for this protocol.
• MGCP—Enables application inspection for the MGCP protocol.
–
Configure—Displays the Select MGCP Map dialog box, which lets you select a map name to
use for this protocol.
• NETBIOS—Enables application inspection for the NetBIOS protocol.
–
Configure—Displays the Select NETBIOS Map dialog box, which lets you select a map name
to use for this protocol.
• PPTP—Enables application inspection for the PPTP protocol.
• RSH—Enables application inspection for the RSH protocol.
• RTSP—Enables application inspection for the RTSP protocol.
• SCCP SKINNY—Enables application inspection for the Skinny protocol.
–
Configure—Displays the Select SCCP (Skinny) Map dialog box, which lets you select a map
name to use for this protocol.
• SIP—Enables application inspection for the SIP protocol.
–
Configure—Displays the Select SIP Map dialog box, which lets you select a map name to use
for this protocol.
• SNMP—Enables application inspection for the SNMP protocol.
–
Configure—Displays the Select SNMP Map dialog box, which lets you select a map name to
use for this protocol.
• SQLNET—Enables application inspection for the SQLNET protocol.
• SUNRPC—Enables application inspection for the SunRPC protocol.
• TFTP—Enables application inspection for the TFTP protocol.
• XDMCP—Enables application inspection for the XDMCP protocol.
Modes
The following table shows the modes in which this feature is available: