24-37
Cisco ASDM User Guide
OL-16647-01
Chapter 24 Configuring Application Layer Protocol Inspection
Service Policy Field Descriptions
Select SCCP (Skinny) Map
The Select SCCP (Skinny) Map dialog box lets you select or create a new SCCP (Skinny) map. An
SCCP (Skinny) map lets you change the configuration values used for SCCP (Skinny) application
inspection. The Select SCCP (Skinny) Map table provides a list of previously configured maps that you
can select for application inspection.
Fields
• Use the default SCCP (Skinny) inspection map—Specifies to use the default SCCP (Skinny)
map.
• Select an SCCP (Skinny) map for fine control over inspection—Lets you select a defined
application inspection map or add a new one.
• Add—Opens the Add Policy Map dialog box for the inspection.
• Encrypted Traffic Inspection—Lets you specify TLS proxy settings for the inspect map.
–
Do not inspect Encrypted Traffic—Disables the inspection of Skinny application inspection.
–
Use Phone Proxy to enable inspection of encrypted traffic—Uses the Phone Proxy configured
on the security appliance to inspect Skinny application traffic. See Phone Proxy, page 19-24.
–
Use TLS Proxy to enable inspection of encrypted traffic—Specifies to use Transaction Layer
Security Proxy to enable inspection of encryped traffic.
TLS Proxy Name:—Name of existing TLS Proxy.
New—Opens the Add TLS Proxy dialog box to add a TLS Proxy.
Modes
The following table shows the modes in which this feature is available:
Select SIP Map
The Select SIP Map dialog box lets you select or create a new SIP map. A SIP map lets you change the
configuration values used for SIP application inspection. The Select SIP Map table provides a list of
previously configured maps that you can select for application inspection.
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
• • • •—
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
• • • •—