Filter
Top Products
24-107
Cisco ASDM User Guide
OL-16647-01
Chapter 24 Configuring Application Layer Protocol Inspection
Inspect Map Field Descriptions
–
Low—Default.
Maximum ESP flows per client: Unlimited.
ESP idle timeout: 00:10:00.
Maximum AH flows per client: Unlimited.
AH idle timeout: 00:10:00.
–
High
Maximum ESP flows per client:10.
ESP idle timeout: 00:00:30.
Maximum AH flows per client: 10.
AH idle timeout: 00:00:30.
–
Customize—Opens the Add/Edit IPSec Pass Thru Policy Map dialog box for additional settings.
–
Default Level—Sets the security level back to the default level of Low.
Modes
The following table shows the modes in which this feature is available:
Add/Edit IPSec Pass Thru Policy Map (Security Level)
The Add/Edit IPSec Pass Thru Policy Map pane lets you configure the security level and additional
settings for IPSec Pass Thru application inspection maps.
Fields
• Name—When adding an IPSec Pass Thru map, enter the name of the IPSec Pass Thru map. When
editing an IPSec Pass Thru map, the name of the previously configured IPSec Pass Thru map is
shown.
• Security Level—Select the security level (high or low).
–
Low—Default.
Maximum ESP flows per client: Unlimited.
ESP idle timeout: 00:10:00.
Maximum AH flows per client: Unlimited.
AH idle timeout: 00:10:00.
–
High
Maximum ESP flows per client:10.
ESP idle timeout: 00:00:30.
Maximum AH flows per client: 10.
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
• • • •—