13-14
Cisco ASDM User Guide
OL-16647-01
Chapter 13 DHCP, DNS and WCCP Services
WCCP
Add or Edit WCCP Service Group
The Add or Edit Service Group dialog box lets you change the service group parameters for a configured
service group.
Fields
• Service—Specifies the service group. You can specify the web cache service, or the identification
number of the service.
• Web Cache—Specifies the web cache service. The maximum number of services, including those
specified with a dynamic service identifier is 256.
• Dynamic Service Number—Enter the dynamic service identifier, which means the service definition
is dictated by the cache. Valid dynamic service numbers are 0 to 254, and are used as the name of
the service group.
• Redirect List—Lets you choose the predefined access list that controls traffic redirected to this
service group.
• Group List—Lets you choose the predefined access list that determines which web caches are
allowed to participate in the service group. Only extended ACLs are allowed.
• Password—Enter a password up to seven characters long, which is used for MD5 authentication for
messages received from the service group.
• Confirm Password—Reenter the password.
• Manage—Click to open the ACL Manager window, where you can create or change the ACL.
Modes
The following table shows the modes in which this feature is available:
Redirection
The Redirection pane lets you enable packet redirection on the ingress of an interface using WCCP.
Fields
• Interface—Displays the interface on which WCCP redirection is enabled.
• Service Group—Displays the name of the service group configured for WCCP.
Modes
The following table shows the modes in which this feature is available:
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
• • • • •