Filter
Top Products
15-23
Cisco ASDM User Guide
OL-16647-01
Chapter 15 High Availability
Field Information for the Failover Panes
Failover-Multiple Mode, Security Context
The fields displayed on the Failover pane in multiple context mode change depending upon whether the
context is in transparent or routed firewall mode.
This section contains the following topics:
• Failover - Routed
• Failover - Transparent
Failover - Routed
Use this pane to define the standby IP address for each interface in the security context and to specify
whether the status of the interface should be monitored.
Fields
• Interface table—Lists the interfaces on the security appliance and identifies their active IP address,
standby IP address, and monitoring status.
–
Interface Name column—Identifies the interface name.
–
Active IP column—Identifies the active IP address for this interface.
–
Standby IP column—Identifies the IP address of the corresponding interface on the standby
failover unit.
–
Is Monitored column—Specifies whether this interface is monitored for failure.
• Edit—Displays the Edit Failover Interface Configuration dialog box for the selected interface.
Modes
The following table shows the modes in which this feature is available:
For More Information
For more information about failover in general, see Understanding Failover.
Edit Failover Interface Configuration
Use the Edit Failover Interface Configuration dialog box to define the standby IP address for an interface
and to specify whether the status of the interface should be monitored.
Fields
• Interface Name—Identifies the interface name.
• Active IP Address—Identifies the IP address for this interface. This field does not appear if an IP
address has not been assigned to the interface.
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
• —— • —