Filter
Top Products
24-32
Cisco ASDM User Guide
OL-16647-01
Chapter 24 Configuring Application Layer Protocol Inspection
Service Policy Field Descriptions
Modes
The following table shows the modes in which this feature is available:
Select ESMTP Map
The Select ESMTP Map dialog box lets you select or create a new ESMTP map. An ESMTP map lets
you change the configuration values used for ESMTP application inspection. The Select ESMTP Map
table provides a list of previously configured maps that you can select for application inspection.
Fields
• Use the default ESMTP inspection map—Specifies to use the default ESMTP map.
• Select an ESMTP map for fine control over inspection—Lets you select a defined application
inspection map or add a new one.
• Add—Opens the Add Policy Map dialog box for the inspection.
Modes
The following table shows the modes in which this feature is available:
Select FTP Map
The Select FTP Map dialog box lets you enable strict FTP application inspection, select an FTP map,
or create a new FTP map. An FTP map lets you change the configuration values used for FTP application
inspection.The Select FTP Map table provides a list of previously configured maps that you can select
for application inspection.
Fields
• FTP Strict (prevent web browsers from sending embedded commands in FTP
requests)—Enables strict FTP application inspection, which causes the security appliance to drop
the connection when an embedded command is included in an FTP request.
• Use the default FTP inspection map—Specifies to use the default FTP map.
• Select an FTP map for fine control over inspection—Lets you select a defined application
inspection map or add a new one.
• Add—Opens the Add Policy Map dialog box for the inspection.
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
• • • •—
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
• • • •—