Filter
Top Products
35-71
Cisco ASDM User Guide
OL-16647-01
Chapter 35 General
Mapping Certificates to IPSec or SSL VPN Connection Profiles
• Default Group Policy—Specifies the following group-policy attributes:
–
Group Policy—Selects a group policy to use as the default group policy. The default value is
DfltGrpPolicy.
–
Manage—Opens the Configure Group Policies dialog box.
–
IPSec Protocol—Enables or disables the use of the IPSec protocol for this connection profile.
Modes
The following table shows the modes in which this feature is available:
Add/Edit Tunnel Group > PPP
On the Add or Edit Tunnel Group window for a IPSec remote access tunnel group, the PPP dialog box
lets you configure or edit the authentication protocols permitted of a PPP connection. This dialog box
applies only to IPSec remote access tunnel groups.
Fields
• CHAP—Enables the use of the CHAP protocol for a PPP connection.
• MS-CHAP-V1—Enables the use of the MS-CHAP-V1 protocol for a PPP connection.
• MS-CHAP-V2—Enables the use of the MA-CHAP-V2 protocol for a PPP connection.
• PAP—Enables the use of the PAP protocol for a PPP connection.
• EAP-PROXY—Enables the use of the EAP-PROXY protocol for a PPP connection. EAP refers to
the Extensible Authentication protocol.
Modes
The following table shows the modes in which this feature is available:
Add/Edit Tunnel Group > IPSec for LAN to LAN Access > General > Basic
On the Add or Edit Tunnel Group window for Site-to-Site Remote Access, the General, Basic dialog box
you can specify a name for the tunnel group that you are adding (Add function only) and select the group
policy.
On the Edit Tunnel Group window, the General dialog box displays the name and type of the tunnel
group you are modifying.
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
• — • ——
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
• — • ——