Filter
Top Products
11-5
Cisco ASDM User Guide
OL-16647-01
Chapter 11 Configuring Dynamic And Static Routing
Dynamic Routing
Setup > Area/Networks Tab
The Area/Networks tab displays the areas, and the networks they contain, for each OSPF process on the
security appliance.
Fields
• Area/Networks—Displays information about the areas and the area networks configured for each
OSPF process. Double-clicking a row in the table opens the Add/Edit OSPF Area dialog box for the
selected area.
–
OSPF Process—Displays the OSPF process the area applies to.
–
Area ID—Displays the area ID.
–
Area Type—Displays the area type. The area type is one of the following values: Normal, Stub,
NSSA.
–
Networks—Displays the area networks.
–
Authentication—Displays the type of authentication set for the area. The authentication type is
one of the following values: None, Password, MD5.
–
Options—Displays any options set for the area type.
–
Cost—Displays the default cost for the area.
• Add—Opens the Add/Edit OSPF Area dialog box. Use this button to add a new area configuration.
• Edit—Opens the Add/Edit OSPF Area dialog box. Use this button to change the parameters of the
selected area.
• Delete—Removes the selected area from the configuration.
Modes
The following table shows the modes in which this feature is available:
Add/Edit OSPF Area
You define area parameters, the networks contained by the area, and the OSPF process associated with
the area in the Add/Edit OSPF Area dialog box.
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
• — • ——
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
• — • ——