Filter
Top Products
44-6
Cisco ASDM User Guide
OL-16647-01
Chapter 44 Monitoring Properties
Monitoring Device Access
All lockouts from the security appliance are removed and usernames removed from the list.
Removing One User Lockout
Use this procedure to remove a lockout for one user who was locked out of the security appliance after
failing to successfully authenticate with an AAA server.
Prerequisites
• You are connected to the security appliance using ASDM.
• You have already completed the initial security appliance configurations included in the ASDM
startup wizard. For more information, see Using the Startup Wizard, page 5-1.
• You have already configured the servers and server groups that are being managed by the security
appliance. For more information, see the Summary of Support, page 14-3.
• You have already configured the user accounts that are being managed by the security appliance
Local server. For more information, see Adding a User Account, page 14-18.
• You have already configured authentication for the security appliance using the section, About
Authentication, page 14-2.
Procedure
To remove a user lockout, perform the following steps:
Step 1 From the ASDM toolbar, click Monitoring.
The monitoring functions display in the left-hand Navigation pane.
Step 2 Click Properties.
The Properties Navigation pane opens.
Step 3 Click the plus (+) symbol next to Device Access.
The list of Device Access functions expands below it.
Step 4 Click AAA Local Locked Out Users.
The AAA Local Locked Out Users dialog box opens in the right-hand pane, displaying a list of users
who failed to successfully authenticate with an AAA server.
Step 5 Select the username from the list.
The row is highlighted.
Step 6 Click Clear Selected Lockout.
The lockout is removed for this user and the row is removed from the list.
Monitoring Authenticated Users
Use this procedure to monitor users who have successfully authenticated with an AAA server.