Filter
Top Products
11-28
Cisco ASDM User Guide
OL-16647-01
Chapter 11 Configuring Dynamic And Static Routing
Dynamic Routing
–
OSPF and OSPF ID—Routes discovered by the OSPF routing process. If you choose OSPF, you
must also enter the OSPF process ID. Additionally, you can select the specific types of OSPF
routes to redistribute from the Match area.
–
EIGRP and EIGRP ID—Routes discovered by the EIGRP routing process. If you choose
EIGRP, you must also specify the autonomous system number of the EIGRP routing process in
the EIGRP ID field.
• Route Map—Specifies the name of a route map that must be satisfied before the route can be
redistributed into the RIP routing process.
• Configure Metric Type—Check this check box to specify a metric for the redistributed routes. If not
specified, the routes are assigned a metric of 0.
–
Transparent—Choose this option to cause the current route metric to be used.
–
Value—Choose this to assign a specific metric value. You can enter a value from 0 to 16.
• Match—If you are redistributing OSPF routes into the RIP routing process, you can choose specific
types of OSPF routes to redistribute by checking the check box next to the route type. If you do not
check any route types, Internal, External 1, and External 2 routes are redistributed by default.
–
Internal—Routes internal to the AS are redistributed.
–
External 1—Type 1 routes external to the AS are redistributed.
–
External 2—Type 2 routes external to the AS are redistributed.
–
NSSA External 1—Type 1 routes external to an NSSA are redistributed.
–
NSSA External 2—Type 2 routes external to an NSSA are redistributed.
Modes
The following table shows the modes in which this feature is available:
EIGRP
EIGRP is an enhanced version of IGRP developed by Cisco. Unlike IGRP and RIP, EIGRP does not send
out periodic route updates. EIGRP updates are sent out only when the network topology changes.
You can enable only one EIGRP routing process on the security appliance.
This section contains the following information:
• Configuring EIGRP, page 11-29
• Field Information for the EIGRP Panes, page 11-30
For information about monitoring dynamically discovered EIGRP neighbors, see Monitoring EIGRP
Neighbors, page 43-7.
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
• — • ——