Filter
Top Products
32-10
Cisco ASDM User Guide
OL-16647-01
Chapter 32 VPN
VPN Wizard
User Accounts
Use the User Accounts panel to add new users to the security appliance internal user database for
authentication purposes.
Fields
Provide the following information:
• User to Be Added—Use the fields in this section to add a user.
–
Username—Enter the username.
–
Password—(Optional) Enter a password.
–
Confirm Password—(Optional) Reenter the password.
• Add — Click to add a user to the database after you have entered the username and optional
password.
• Username—Displays the names of all users in the database.
• Delete—To remove a user from the database, highlight the appropriate username and click Delete.
Modes
The following table shows the modes in which this feature is available:
Address Pool
Use the Address Pool panel to configure a pool of local IP addresses that the security appliance assigns
to remote VPN clients.
Fields
• Name—Displays the name of the tunnel group to which the address pool applies. You set this name
in the VPN Client Name and Authentication Method panel.
• Pool Name—Select a descriptive identifier for the address pool.
• New...—Click to configure a new address pool.
• Range Start Address—Type the starting IP address in the address pool.
• Range End Address—Type the ending IP address in the address pool.
• Subnet Mask—(Optional) Select the subnet mask for these IP addresses
Modes
The following table shows the modes in which this feature is available:
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
• — • ——