Filter
Top Products
35-21
Cisco ASDM User Guide
OL-16647-01
Chapter 35 General
ACL Manager
Browse Other
The Browse Other dialog box lets you select a protocol group for this rule.
Fields
• Add—Opens the Add Protocol Group dialog box, on which you can configure a new service group.
• Find—Opens the Filter field.
• Filter/Clear—Specifies a filter criterion that you can use to search for items in the Name list, thus
displaying only those items that match that criterion. When you make an entry in the Filter field, the
Filter button becomes active. Clicking the Filter button performs the search. After you perform the
search, the Filter button is dimmed, and the Clear button becomes active. Clicking the Clear button
clears the filter field and dims the Clear button.
• Type—Determines the type of object to use as the protocol group for this rule. Selections are IP
Address Objects, IP Names, Network Object Groups, and All. The contents of the table following
this field change, depending upon your selection.
• Name—Lists the predefined protocol groups for your selection.
Modes
The following table shows the modes in which this feature is available:
Add Protocol Group
The Add Protocol Group dialog box lets you configure a new a protocol group by name or by number to
add to the browsable protocol list for this rule. Selecting a member of either the Members not in Group
or the Members in Group list activates the Add and Remove buttons.
Fields
• Group Name—Specifies the name of the new TCP service group.
• Description—(Optional) Provides a brief description of this group.
• Members not in Group—Presents the option to select either a protocol/protocol group or a protocol
number to add to the Members in Group list.
• Protocol/Protocol Group—Selects the option to select the name of a protocol or protocol group to
add to the Members in Group list.
• Protocol #—Selects the option to specify a protocol by number to add to the Members in Group list.
• Add—Moves a selected item from the Members not in Group list to the Members in Group list.
• Remove—Moves a selected item from the Members in Group list to the Members not in Group list.
• Members in Group—Lists the members already configured in this service group.
Modes
The following table shows the modes in which this feature is available:
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
• — • ——