Filter
Top Products
Contents
viii
Cisco ASDM User Guide
OL-16647-01
Configuring an Interface (Single Mode) 7-5
Enabling Same Security Level Communication (Single Mode) 7-8
PPPoE IP Address and Route Settings 7-9
CHAPTER
8 Configuring Interfaces in Multiple Mode 8-1
Configuring Interfaces in the System Configuration (Multiple Mode) 8-1
Configuring Physical Interfaces in the System Configuration (Multiple Mode) 8-2
Physical Interface Overview 8-2
Configuring and Enabling Physical Interfaces in the System Configuration (Multiple Mode) 8-3
Configuring Redundant Interfaces in the System Configuration (Multiple Mode) 8-3
Redundant Interface Overview 8-4
Adding a Redundant Interface in the System Configuration (Multiple Mode) 8-5
Configuring VLAN Subinterfaces and 802.1Q Trunking in the System Configuration (Multiple
Mode) 8-5
Subinterface Overview 8-5
Adding a Subinterface in the System Configuration (Multiple Mode) 8-6
Enabling Jumbo Frame Support for the ASA 5580 in the System Configuration (Multiple Mode) 8-7
Allocating Interfaces to Contexts 8-7
Configuring Interface Parameters within each Context (Multiple Mode) 8-7
Interface Parameters Overview 8-7
Default State of Interfaces 8-8
Default Security Level 8-8
Configuring Interface Parameters in each Context (Multiple Mode) 8-9
Enabling Same Security Level Communication (Multiple Mode) 8-10
CHAPTER
9 Configuring Switch Ports and VLAN Interfaces for the Cisco ASA 5505 Adaptive Security
Appliance 9-1
Interface Overview 9-1
Understanding ASA 5505 Ports and Interfaces 9-2
Maximum Active VLAN Interfaces for Your License 9-2
Default Interface Configuration 9-4
VLAN MAC Addresses 9-4
Power Over Ethernet 9-4
Monitoring Traffic Using SPAN 9-4
Security Level Overview 9-5
Configuring VLAN Interfaces 9-5
Interfaces > Interfaces 9-6
Add/Edit Interface > General 9-8
Add/Edit Interface > Advanced 9-10