Filter
Top Products
1-21
Cisco ASDM User Guide
OL-16647-01
Chapter 1 Welcome to ASDM
Home Pane
–
Hits—Shows the number of packet hits that occurred.
–
Source—Shows the source IP address.
–
Dest—Shows the destination IP address.
–
Service—Shows the service (protocol or port) for the connection.
–
Action—Shows whether the rule is a permit or deny rule.
In the Table view, you can select a rule in the list and right-click the rule to display a popup menu
item, Show Rule. Choose this item to go to the Access Rules table and select that rule in this table.
• Top Usage Status—Provides usage status for hosts (source and destinations), and ports and
protocols.
–
Interval—Lets you view information based on the interval you choose. Available values are Last
1 hour, Last 8 hours, and Last 24 hours.
–
Based On—Shows the statistics in Packet Hits or Bytes.
–
Display—Lets you view the same information in three different formats: Table, Pie, or Bar.
–
Top 10 Services—Shows statistics for the top 10 services, including the combined statistics of
TCP/UDP port and IP protocol types.
–
Top 10 Sources—Shows the top 10 host source addresses.
–
Top 10 Destinations—Shows the top 10 host destination addresses.
Modes
The following table shows the modes in which this feature is available:
Content Security Tab
The Content Security tab lets you view important information about the Content Security and Control
(CSC) SSM. This pane appears only if a CSC SSM is installed in the adaptive security appliance.
For an introduction to the CSC SSM, see About the CSC SSM.
Note If you have not completed the CSC Setup Wizard by choosing Configuration > Trend Micro Content
Security
> CSC Setup, you cannot access the panes under Home > Content Security. Instead, a dialog
box appears and lets you access the Setup Wizard directly from this location.
Fields
• Device Information—Shows the following details:
–
Model—Display only. Shows the type of SSM installed in your adaptive security appliance.
–
Mgmt IP—Display only. Shows the IP address of the management interface for the CSC SSM.
–
Versi on—Display only. Shows the CSC SSM software version.
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
• • • — —