Filter
Top Products
17-4
Cisco ASDM User Guide
OL-16647-01
Chapter 17 Configuring Logging
Syslog Setup
Step 4 In the Username field, specify the username to log in to the FTP server.
Step 5 In the Password field, specify the password associated with the username to log in to the FTP server.
Step 6 In the Confirm Password field, reenter the password, and click OK.
Modes
The following table shows the modes in which this feature is available:
Configure Logging Flash Usage
The Configure Logging Flash Usage dialog box lets you specify the limits for saving log buffer content
to internal flash memory.
To configure logging flash usage, perform the following steps:
Step 1 In the Maximum Flash to Be Used by Logging field, specify the maximum amount of internal flash
memory that can be used for logging (in KB).
Step 2 In the Minimum Free Space to Be Preserved field, specify the amount of internal flash memory that is
preserved (in KB). When the internal flash memory approaches that limit, new logs are no longer saved.
Step 3 Click OK to close this dialog box.
Modes
The following table shows the modes in which this feature is available:
Syslog Setup
The Syslog Setup pane lets you set the facility code to include in messages destined for syslog servers
and determine whether syslog messages should include the timestamp. You can change message severity
levels and disable messages that you do not want to be logged. To access this pane, choose
Configuration > Device Management > Logging > Syslog Setup.
To configure syslog messaging, perform the following steps:
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
• • • •—
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
• • •——