Filter
Top Products
14-13
Cisco ASDM User Guide
OL-16647-01
Chapter 14 Configuring AAA Servers and the Local Database
Configuring AAA Server Groups
TACACS+ Server Fields
The following table describes the unique fields for configuring TACACS+ servers, for use with the
“Adding a Server to a Group” section on page 14-10.
SDI Server Fields
The following table describes the unique fields for configuring SDI servers, for use with the “Adding a
Server to a Group” section on page 14-10.
Windows NT Domain Server Fields
The following table describes the unique fields for configuring Windows NT Domain servers, for use
with the “Adding a Server to a Group” section on page 14-10.
Field Description
Server Port The port to be used for this server.
Server Secret Key The shared secret key used to authenticate the TACACS+ server to the
security appliance. The server secret you configure here should match
the one configured on the TACACS+ server. If you do not know the
server secret, ask the RADIUS server administrator. The maximum
field length is 64 characters.
Field Description
Server Port The TCP port number by which this server is accessed.
Retry Interval The duration of time, 1 to 10 seconds, that the security appliance waits
between attempts to contact the server.
Field Description
Server Port Port number 139, or the TCP port number used by the security
appliance to communicate with the Windows NT server.
Domain Controller The host name (no more than 15 characters) of the NT Primary
Domain Controller for this server. For example, PDC01. You must
enter a name, and it must be the correct host name for the server whose
IP Address you added in the field, Authentication Server Address. If
the name is incorrect, authentication fails.