Filter
Top Products
14-11
Cisco ASDM User Guide
OL-16647-01
Chapter 14 Configuring AAA Servers and the Local Database
Configuring AAA Server Groups
• Kerberos Server Fields, page 14-14
• LDAP Server Fields, page 14-15
• HTTP Form Server Fields, page 14-17
Step 7 Click OK.
The dialog box closes and the AAA server is added to the AAA server group.
Step 8 In the AAA Server Groups pane, click Apply to save the changes.
The changes are saved.
AAA Server Parameters
The following sections list the unique fields for each server type when adding a server to a server group
(see the “Adding a Server to a Group” section on page 14-10):
• RADIUS Server Fields, page 14-11
• TACACS+ Server Fields, page 14-13
• SDI Server Fields, page 14-13
• Windows NT Domain Server Fields, page 14-13
• Kerberos Server Fields, page 14-14
• LDAP Server Fields, page 14-15
• HTTP Form Server Fields, page 14-17
RADIUS Server Fields
The following table describes the unique fields for configuring RADIUS servers, for use with the
“Adding a Server to a Group” section on page 14-10.
Field Description
Server Authentication Port The server port to be used for authentication of users.
The default port is 1645.
Server Accounting Port The server port to be used for accounting of users.
The default port is 1646.
Retry Interval The duration of time, 1 to 10 seconds, that the security appliance waits
between attempts to contact the server.
Server Secret Key The shared secret key used to authenticate the RADIUS server to the
security appliance. The server secret you configure here should match
the one configured on the RADIUS server. If you do not know the
server secret, ask the RADIUS server administrator. The maximum
field length is 64 characters.