Filter
Top Products
22-16
Cisco ASDM User Guide
OL-16647-01
Chapter 22 Configuring Service Policy Rules
RADIUS Accounting Field Descriptions
RADIUS Inspect Map
The RADIUS pane lets you view previously configured RADIUS application inspection maps. A
RADIUS map lets you change the default configuration values used for RADIUS application inspection.
You can use a RADIUS map to protect against an overbilling attack.
Fields
• Name—Enter the name of the inspect map, up to 40 characters in length.
• Description—Enter the description of the inspect map, up to 200 characters in length.
• RADIUS Inspect Maps—Table that lists the defined RADIUS inspect maps. The defined inspect
maps are also listed in the RADIUS area of the Inspect Maps tree.
• Add—Adds the new RADIUS inspect map to the defined list in the RADIUS Inspect Maps table and
to the RADIUS area of the Inspect Maps tree. To configure the new RADIUS map, select the
RADIUS entry in Inspect Maps tree.
• Delete—Deletes the application inspection map selected in the RADIUS Inspect Maps table and
from the RADIUS area of the Inspect Maps tree.
Modes
The following table shows the modes in which this feature is available:
RADIUS Inspect Map Host
The RADIUS Inspect Map Host Parameters pane lets you configure the host parameter settings for the
inspect map.
Fields
• Name—Shows the name of the previously configured RADIUS accounting map.
• Description—Enter the description of the RADIUS accounting map, up to 200 characters in length.
• Host Parameters—Lets you configure host parameters.
–
Host IP Address—Specify the IP address of the host that is sending the RADIUS messages.
–
Key: (optional)—Specify the key.
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
• • • •—
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
• • • •—