Filter
Top Products
24-106
Cisco ASDM User Guide
OL-16647-01
Chapter 24 Configuring Application Layer Protocol Inspection
Inspect Map Field Descriptions
–
Regular Expression—Lists the defined regular expressions to match.
–
Manage—Opens the Manage Regular Expressions dialog box, which lets you configure regular
expressions.
–
Regular Expression Class—Lists the defined regular expression classes to match.
–
Manage—Opens the Manage Regular Expression Class dialog box, which lets you configure
regular expression class maps.
• Filename Criterion Values—Specifies to match the filename from the IM file transfer service.
Applies the regular expression match.
–
Regular Expression—Lists the defined regular expressions to match.
–
Manage—Opens the Manage Regular Expressions dialog box, which lets you configure regular
expressions.
–
Regular Expression Class—Lists the defined regular expression classes to match.
–
Manage—Opens the Manage Regular Expression Class dialog box, which lets you configure
regular expression class maps.
• Multiple Matches—Specifies multiple matches for the IM inspection.
–
IM Traffic Class—Specifies the IM traffic class match.
–
Manage—Opens the Manage IM Class Maps dialog box to add, edit, or delete IM Class Maps.
• Action—Drop connection, reset, or log.
• Log—Enable or disable.
Modes
The following table shows the modes in which this feature is available:
IPSec Pass Through Inspect Map
The IPSec Pass Through pane lets you view previously configured IPSec Pass Through application
inspection maps. An IPSec Pass Through map lets you change the default configuration values used for
IPSec Pass Through application inspection. You can use an IPSec Pass Through map to permit certain
flows without using an access list.
Fields
• IPSec Pass Through Inspect Maps—Table that lists the defined IPSec Pass Through inspect maps.
• Add—Configures a new IPSec Pass Through inspect map. To edit an IPSec Pass Through inspect
map, select the IPSec Pass Through entry in the IPSec Pass Through Inspect Maps table and click
Customize.
• Delete—Deletes the inspect map selected in the IPSec Pass Through Inspect Maps table.
• Security Level—Select the security level (high or low).
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
• • • •—