Filter
Top Products
24-27
Cisco ASDM User Guide
OL-16647-01
Chapter 24 Configuring Application Layer Protocol Inspection
Sun RPC Inspection
• IP address—Displays the IP address of the SunRPC server.
• Mask—Displays the subnet mask of the IP Address of the SunRPC server.
• Service ID—Displays the SunRPC program number, or service ID, allowed to traverse the security
appliance.
• Protocol—Displays the SunRPC transport protocol (TCP or UDP).
• Port—Displays the SunRPC protocol port range.
• Timeout—Displays the idle time after which the access for the SunRPC service traffic is closed.
Modes
The following table shows the modes in which this feature is available:
Add/Edit SUNRPC Service
The Configuration > Firewall > Advanced > SUNRPC Server > Add/Edit SUNRPC Service dialog box
lets you specify what SunRPC services are allowed to traverse the security appliance and their specific
timeout, on a per-server basis.
Fields
• Interface Name—Specifies the interface on which the SunRPC server resides.
• Protocol—Specifies the SunRPC transport protocol (TCP or UDP).
• IP address—Specifies the IP address of the SunRPC server.
• Port—Specifies the SunRPC protocol port range.
• Mask—Specifies the subnet mask of the IP Address of the SunRPC server.
• Timeout—Specifies the idle time after which the access for the SunRPC service traffic is closed.
Format is HH:MM:SS.
• Service ID—Specifies the SunRPC program number, or service ID, allowed to traverse the security
appliance.
Modes
The following table shows the modes in which this feature is available:
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
• • • •—
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
• • • •—