Filter
Top Products
24-126
Cisco ASDM User Guide
OL-16647-01
Chapter 24 Configuring Application Layer Protocol Inspection
Inspect Map Field Descriptions
–
Regular Expression Class—Lists the defined regular expression classes to match.
–
Manage—Opens the Manage Regular Expression Class dialog box, which lets you configure
regular expression class maps.
• URI Length Criterion Values—Specifies to match a URI in the SIP headers greater than specified
length.
–
URI type—Specifies to match either SIP URI or TEL URI.
–
Greater Than Length—Length in bytes.
• Multiple Matches—Specifies multiple matches for the SIP inspection.
–
SIP Traffic Class—Specifies the SIP traffic class match.
–
Manage—Opens the Manage SIP Class Maps dialog box to add, edit, or delete SIP Class Maps.
• Actions—Primary action and log settings.
–
Action—Drop packet, drop connection, reset, log. Note: Limit rate (pps) action is available for
request methods invite and register.
–
Log—Enable or disable.
Modes
The following table shows the modes in which this feature is available:
SNMP Inspect Map
The SNMP pane lets you view previously configured SNMP application inspection maps. An SNMP
map lets you change the default configuration values used for SNMP application inspection.
Fields
• Map Name—Lists previously configured application inspection maps. Check a map and click Edit
to view or change an existing map.
• Add—Configures a new SNMP inspect map.
• Edit—Edits the selected SNMP entry in the SNMP Inspect Maps table.
• Delete—Deletes the inspect map selected in the SNMP Inspect Maps table.
Modes
The following table shows the modes in which this feature is available:
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
• • • •—