Filter
Top Products
24-91
Cisco ASDM User Guide
OL-16647-01
Chapter 24 Configuring Application Layer Protocol Inspection
Inspect Map Field Descriptions
Add/Edit H.323 Policy Map (Security Level)
The Add/Edit H.323 Policy Map pane lets you configure the security level and additional settings for
H.323 application inspection maps.
Fields
• Name—When adding an H.323 map, enter the name of the H.323 map. When editing an H.323 map,
the name of the previously configured H.323 map is shown.
• Description—Enter the description of the H323 map, up to 200 characters in length.
• Security Level—Select the security level (low, medium, or high).
–
Low—Default.
State Checking h225 Disabled
State Checking ras Disabled
Call Party Number Disabled
Call duration Limit Disabled
RTP conformance not enforced
–
Medium
State Checking h225 Enabled
State Checking ras Enabled
Call Party Number Disabled
Call duration Limit Disabled
RTP conformance enforced
Limit payload to audio or video, based on the signaling exchange: no
–
High
State Checking h225 Enabled
State Checking ras Enabled
Call Party Number Enabled
Call duration Limit 1:00:00
RTP conformance enforced
Limit payload to audio or video, based on the signaling exchange: yes
–
Phone Number Filtering—Opens the Phone Number Filtering dialog box which lets you
configure the settings for a phone number filter.
–
Default Level—Sets the security level back to the default.
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
• • • •—