Filter
Top Products
6-10
Cisco ASDM User Guide
OL-16647-01
Chapter 6 Configuring Basic Device Settings
System Image/Configuration
Modes
The following table shows the modes in which this feature is available:
Advanced Auto Update Settings
Fields
• Use Device ID to uniquely identify the ASA—Enables authentication using a Device ID. The Device
ID is used to uniquely identify the security appliance to the Auto Update server.
• Device ID—Type of Device ID to use.
–
Hostname—The name of the host.
–
Serial Number—Device serial number.
–
IP Address on interface—The IP address of the selected interface, used to uniquely identify the
security appliance to the Auto Update server.
–
MAC Address on interface—The MAC address of the selected interface, used to uniquely
identify the security appliance to the Auto Update server.
–
User-defined value—A unique user ID.
Modes
The following table shows the modes in which this feature is available:
Boot Image/Configuration
Boot Image/Configuration lets you choose which image file the security appliance will boot from, as
well as which configuration file it will use at startup.
You can specify up to four local binary image files for use as the startup image, and one image located
on a TFTP server for the device to boot from. If you specify an image located on a TFTP server, it must
be first in the list. In the event the device cannot reach the TFTP server to load the image from, it will
attempt to load the next image file in the list located in Flash.
If you do not specify any boot variable, the first valid image on internal flash will be chosen to boot the
system.
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
• • •——
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
• • •——