Filter
Top Products
38-4
Cisco ASDM User Guide
OL-16647-01
Chapter 38 Clientless SSL VPN
Configuring the Setup for Cisco Secure Desktop
Examples
Here are examples of ACLs for Clientless SSL VPN:
Modes
The following table shows the modes in which this feature is available:
Configuring the Setup for Cisco Secure Desktop
The Cisco Secure Desktop Setup window displays the version and state of the Cisco Secure Desktop
image if it is installed on the security appliance, indicates whether it is enabled, and shows the size of
the cache used to hold the Cisco Secure Desktop and SSL VPN Client on the security appliance.
You can use the buttons in this window as follows:
• To transfer a copy of a Cisco Secure Desktop image from your local computer to the flash device of
the security appliance click Upload.
To prepare to install or upgrade Cisco Secure Desktop, use your Internet browser to download a
securedesktop_asa_<n>_<n>*.pkg file from
http://www.cisco.com/cgi-bin/tablebuild.pl/securedesktop to any location on your PC. Then use this
button to transfer a copy from your local computer to the flash device. Click Browse Flash to install
it into the running configuration. Finally, check Enable Secure Desktop.
• To install or replace the Cisco Secure Desktop image on the flash device of the security appliance,
click Browse Flash.
Action Filter Effect
Deny url http://*.yahoo.com/ Denies access to all of Yahoo!
Deny url cifs://fileserver/share/directory Denies access to all files in the specified
location.
Deny url https://www.company.com/ directory/file.html Denies access to the specified file.
Permit url https://www.company.com/directory Permits access to the specified location
Deny url http://*:8080/ Denies HTTPS access to anywhere via
port 8080.
Deny url http://10.10.10.10 Denies HTTP access to 10.10.10.10.
Permit url any Permits access to any URL. Usually used
after an ACL that denies url access.
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
• — • ——