Filter
Top Products
11-36
Cisco ASDM User Guide
OL-16647-01
Chapter 11 Configuring Dynamic And Static Routing
Dynamic Routing
For More Information
• Configuring EIGRP, page 11-29
Redistribution
The Redistribution pane displays the rules for redistributing routes from other routing protocols into the
EIGRP routing process. Each row of the Redistribution pane table contains a route redistribution entry.
To add or modify route redistribution into the EIGRP routing process, do one of the following:
• To add a new redistribution rule, click Add. The Add EIGRP Redistribution Entry dialog box opens.
• To edit an existing EIGRP static neighbor, select the address in the table and click Edit. You can
also double-click an entry in the table to edit that entry. The Edit EIGRP Redistribution Entry dialog
box opens.
Fields
The Add/Edit EIGRP Redistribution Entry dialog box fields:
• AS—Displays the autonomous system number of the EIGRP routing process to which the entry
applies.
• Static—Redistributes static routes into the EIGRP routing process. Static routes that fall within the
scope of a network statement are automatically redistributed into EIGRP; you do not need to define
a redistribution rule for them.
• Connected—Redistributes connected routes into the EIGRP routing process. Connected routes that
fall within the scope of a network statement are automatically redistributed into EIGRP; you do not
need to define a redistribution rule for them.
• RIP—Redistributes routes discovered by the RIP routing process into EIGRP.
• Optional Metrics—Defines the metrics used for the redistributed route. You do not need to define
these values if you already defined the default metrics in the Edit EIGRP Process Advanced
Properties dialog box (see Edit EIGRP Process Advanced Properties, page 11-31 for information
about setting the default metrics).
–
Bandwidth—EIGRP bandwidth metric in Kilobits per second. Valid values are from 1 to
4294967295.
–
Delay—EIGRP delay metric, in 10 microsecond units. Valid values are from 0 to 4294967295.
–
Reliability—EIGRP reliability metric. Valid values are from 0 to 255, where 255 indicates
100% reliability.
–
Loading—EIGRP effective bandwidth (loading) metric. Valid values are from 1 to 255, where
255 indicates 100% loaded.
–
MTU—The MTU of the path. Valid values are from 1 to 65535.
• Route Map—To further define which routes are redistributed into the EIGRP routing process, enter
the name of a route map.
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
• — • ——