Filter
Top Products
44-9
Cisco ASDM User Guide
OL-16647-01
Chapter 44 Monitoring Properties
Monitoring Device Access
The following table describes the fields for monitoring active SSH sessions.
Modes
The following table shows the modes in which this feature is available:
Disconnecting an Active Session
Use this procedure to disconnect an active ASDM/HTTPS, SSH, or Telnet session that is currently
connected to the security appliance.
Prerequisites
• You are connected to the security appliance using ASDM.
• You have already completed the initial security appliance configurations included in the ASDM
startup wizard. For more information, see Using the Startup Wizard, page 5-1.
• You have already configured the servers and server groups that are being managed by the security
appliance. For more information, see the Summary of Support, page 14-3.
• You have already configured the user accounts that are being managed by the security appliance
Local server. For more information, see Adding a User Account, page 14-18.
• You have already configured the security appliance access. See the procedures in one of the
following sections:
–
Configuring Device Access for ASDM, Telnet, or SSH, page 16-1
–
Configuring CLI Parameters, page 16-2
Field Description
Client The client type for the selected SSH session.
User The user name for the selected SSH session.
State The state of the selected SSH session.
Version The version of SSH used to connect to the security appliance.
Encryption (In) The inbound encryption method used for the selected session.
Encryption (Out) The outbound encryption method used for the selected session.
HMAC (In) The configured HMAC for the selected inbound SSH session.
HMAC (Out) The configured HMAC for the selected outbound SSH session.
SID The session ID of the selected session.
Disconnect Disconnects an active SSH session connected to the security appliance.
Refresh Refreshes the dialog box display.
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
• • • •—