Filter
Top Products
35-50
Cisco ASDM User Guide
OL-16647-01
Chapter 35 General
Add or Edit an IPSec Remote Access Connection Profile
Add or Edit an IPSec Remote Access Connection Profile
The Add or Edit IPSec Remote Access Connection Profile dialog box has a navigation pane that lets you
select basic or advanced elements to configure.
Add or Edit IPSec Remote Access Connection Profile Basic
The Add or Edit IPSec Remote Access Connection Profile Basic dialog box lets you configure common
attributes for IPSec connections.
Fields
• Name—Identifies the name of the connection.
• IKE Peer Authentication—Configures IKE peers.
–
Pre-shared key—Specifies the value of the pre-shared key for the connection. The maximum
length of a pre-shared key is 128 characters.
–
Identity Certificate—Selects the name of an identity certificate, if any identity certificates are
configured and enrolled.
–
Manage—Opens the Manage Identity Certificates window, on which you can add, edit, delete,
export, and show details for a selected certificate.
• User Authentication—Specifies information about the servers used for user authentication. You can
configure more authentication information in the Advanced section.
–
Server Group—Selects the server group to use for user authentication. the default is LOCAL.
If you select something other than LOCAL, the Fallback check box becomes available.
–
Manage—Opens the Configure AAA Server Groups dialog box.
–
Fallback—Specifies whether to use LOCAL for user authentication if the specified server group
fails.
• Client Address Assignment—Specifies attributes relevant to assigning client attributes.
–
DHCP Servers—Specifies the IP address of a DHCP server to use. You can add up to 10 servers,
separated by spaces.
–
Client Address Pools—Specifies up to 6 predefined address pools. To define an address pool,
go to Configuration > Remote Access VPN > Network Client Access > Address Assignment >
Address Pools.
–
Select—Opens the Select Address Pools dialog box.
• Default Group Policy—Specifies attributes relevant to the default group policy.
–
Group Policy—Selects the default group policy to use for this connection. The default is
DfltGrpPolicy.
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
• — • ——