Filter
Top Products
11-38
Cisco ASDM User Guide
OL-16647-01
Chapter 11 Configuring Dynamic And Static Routing
Dynamic Routing
For More Information
• Configuring EIGRP, page 11-29
Summary Address
The Summary Address pane displays a table of the statically-defined EIGRP summary addresses. By
default, EIGRP summarizes subnet routes to the network level. You can create statically-defined EIGRP
summary addresses to the subnet level from the Summary Address pane.
To create or modify a summary address, do one of the following:
• To add a new EIGRP summary address, click Add. The Add Summary Address dialog box opens.
• To edit an existing EIGRP summary address, select the address in the table and click Edit. You can
also double-click an entry in the table to edit that entry. The Edit Summary Address dialog box
opens.
Fields
The Add/Edit EIGRP Summary Address Entry dialog box contains the following fields. These fields are
also shown in the Summary Address table.
• EIGRP AS—Select the autonomous system number of the EIGRP routing process the summary
address applies to.
• Interface—The interface the summary address is advertised from.
• IP Address—Enter the IP address of the summary route.
• Netmask—Select or enter the network mask to apply to the IP address.
• Administrative Distance—Enter the administrative distance for the route. If left blank, the route has
the default administrative distance of 5.
Modes
The following table shows the modes in which this feature is available:
For More Information
• Configuring EIGRP, page 11-29
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
• — • ——
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
• — • ——