Filter
Top Products
29-19
Cisco ASDM User Guide
OL-16647-01
Chapter 29 Configuring Trend Micro Content Security
CSC SSM Setup
• Add—Click to specify additional traffic details for CSC scanning. For more information, see
Specify traffic for CSC Scan, page 29-19.
• Edit—Click to modify additional traffic details for CSC scanning. For more information, see
Specify traffic for CSC Scan, page 29-19.
• Delete—Click to remove additional traffic details for CSC scanning.
Modes
The following table shows the modes in which this feature is available:
For More Information
See Managing the CSC SSM, page 29-2
Specify traffic for CSC Scan
The Specify traffic for CSC Scan dialog box allows you to define, modify, or remove additional settings
for selecting traffic for CSC scanning.
Fields
• Interface—Choose the type of interface to the CSC SSM from the drop-down list. Available settings
are global (all interfaces), inside, management, and outside.
• Source—Choose the source of network traffic for the CSC SSM to scan from the drop-down list.
• Destination—Choose the destination of network traffic for the CSC SSM to scan from the
drop-down list.
• Service—Choose the type of service for the CSC SSM to scan from the drop-down list.
• Description—Describes the network traffic that you define for the CSC SSM to scan.
• If CSC card fails—Specifies whether or not to allow the CSC SSM to scan network traffic if the CSC
card fails.
Click Permit to allow traffic through without being scanned. Click Close to prevent traffic from
going through without being scanned. Click OK to save your settings. The added traffic details
appear on the CSC Setup Wizard Traffic selection for CSC Scan screen. Click Cancel to discard
these settings and return to the CSC Setup Wizard Traffic selection for CSC Scan screen. If you click
Cancel, ASDM displays a dialog box to confirm your decision.
Modes
The following table shows the modes in which this feature is available:
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
• • •——