Filter
Top Products
24-115
Cisco ASDM User Guide
OL-16647-01
Chapter 24 Configuring Application Layer Protocol Inspection
Inspect Map Field Descriptions
Modes
The following table shows the modes in which this feature is available:
SCCP (Skinny) Inspect Map
The SCCP (Skinny) pane lets you view previously configured SCCP (Skinny) application inspection
maps. An SCCP (Skinny) map lets you change the default configuration values used for SCCP (Skinny)
application inspection.
Skinny application inspection performs translation of embedded IP address and port numbers within the
packet data, and dynamic opening of pinholes. It also performs additional protocol conformance checks
and basic state tracking.
Fields
• SCCP (Skinny) Inspect Maps—Table that lists the defined SCCP (Skinny) inspect maps.
• Add—Configures a new SCCP (Skinny) inspect map. To edit an SCCP (Skinny) inspect map, select
the SCCP (Skinny) entry in the SCCP (Skinny) Inspect Maps table and click Customize.
• Delete—Deletes the inspect map selected in the SCCP (Skinny) Inspect Maps table.
• Security Level—Select the security level (high or low).
–
Low—Default.
Registration: Not enforced.
Maximum message ID: 0x181.
Minimum prefix length: 4
Media timeout: 00:05:00
Signaling timeout: 01:00:00.
RTP conformance: Not enforced.
–
Medium
Registration: Not enforced.
Maximum message ID: 0x141.
Minimum prefix length: 4.
Media timeout: 00:01:00.
Signaling timeout: 00:05:00.
RTP conformance: Enforced.
Limit payload to audio or video, based on the signaling exchange: No.
–
High
Registration: Enforced.
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
• • • •—