44-8
Cisco ASDM User Guide
OL-16647-01
Chapter 44 Monitoring Properties
Monitoring Device Access
• You have already configured the security appliance access for the session traffic you want to
monitor. See the procedures in one of the following sections:
–
Configuring Device Access for ASDM, Telnet, or SSH, page 16-1
–
Configuring CLI Parameters, page 16-2
Procedure
To monitor active sessions, perform the following steps:
Step 1 From the ASDM toolbar, click Monitoring.
The monitoring functions display in the left-hand Navigation pane.
Step 2 Click Properties.
The Properties Navigation pane opens.
Step 3 Click the plus (+) symbol next to Device Access.
The list of Device Access functions expands below it.
Step 4 Click ASDM/HTTPS/Telnet/SSH Sessions.
A dialog box opens in the right-hand pane, displaying the list of currently active connections.
The following table describes the fields for monitoring active ASDM/HTTPS/Telnet sessions.
Field Description
Type The type of connection (ASDM/HTTPS/Telnet).
Session ID The name of a currently connected ASDM/HTTPS/Telnet session.
IP Address The IP address of the host or network that is currently connected to
the security appliance.
Disconnect Disconnects the selected ASDM/HTTPS/Telnet session from the
security appliance.
Refresh Refreshes the dialog box display.