Filter
Top Products
35-26
Cisco ASDM User Guide
OL-16647-01
Chapter 35 General
ACL Manager
Note A carriage return/line feed, created by pressing Enter, counts as 2 characters.
Modes
The following table shows the modes in which this feature is available:
Add/Edit Internal Group Policy > Client Configuration Tab > Cisco Client Parameters Tab
This tab configures client attributes that are specific to Cisco clients, including password storage,
enabling or disabling IPSec over UDP and setting the UDP port number, and configuring IPSec backup
servers.
Fields
• Store Password on Client System—Enables or disables storing the password on the client system.
Note Storing the password on a client system can constitute a potential security risk.
• IPSec over UDP—Enables or disables using IPSec over UDP.
• IPSec over UDP Port—Specifies the UDP port to use for IPSec over UDP.
• IPSec Backup Servers—Activates the Server Configuration and Server IP Addresses fields, so you
can specify the UDP backup servers to use if these values are not inherited.
• Server Configuration—Lists the server configuration options to use as an IPSec backup server. The
available options are: Keep Client Configuration (the default), Use the Backup Servers Below, and
Clear Client Configuration.
• Server Addresses (space delimited)—Specifies the IP addresses of the IPSec backup servers. This
field is available only when the value of the Server Configuration selection is Use the Backup
Servers Below.
Modes
The following table shows the modes in which this feature is available:
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
• — • ——
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
• — • ——