Filter
Top Products
6-5
Cisco ASDM User Guide
OL-16647-01
Chapter 6 Configuring Basic Device Settings
Configuring Advanced Device Management Features
Note To redirect HTTP, the interface requires an access list that permits HTTP. Otherwise, the interface cannot
listen to the HTTP port.
To change the HTTP redirect setting of an interface or the port from which it redirects HTTP
connections, select the interface in the table and click Edit. You can also double-click an interface. The
Edit HTTP/HTTPS Settings dialog box opens.
Edit HTTP/HTTPS Settings
The Edit HTTP/HTTPS Settings dialog box lets you change the HTTP redirect setting of an interface or
the port number.
Fields
The Edit HTTP/HTTPS Settings dialog box includes the following fields:
• Interface—Identifies the interface on which the security appliance redirects or does not redirect
HTTP requests to HTTPS.
• Redirect HTTP to HTTPS—Check to redirect HTTP requests to HTTPS, or uncheck to not redirect
HTTP requests to HTTPS.
• HTTP Port—Identifies the port from which the interface redirects HTTP connections. By default it
listens to port 80.
Modes
The following table shows the modes in which this feature is available:
Configuring Maximum SSL VPN Sessions
This pane lets you set a maximum number of SSL VPN sessions.
Fields
Maximum Sessions—Enter the maximum number of Clientless SSL VPN sessions you want to allow.
Be aware that the different ASA models support Clientless SSL VPN sessions as follows: ASA 5510
supports a maximum of 250; ASA 5520 maximum is 750; ASA 5540 maximum is 2500; ASA 5550
maximum is 5000.
Modes
The following table shows the modes in which this feature is available:
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
• — • ——