24-38
Cisco ASDM User Guide
OL-16647-01
Chapter 24 Configuring Application Layer Protocol Inspection
Service Policy Field Descriptions
Fields
• Use the default SIP inspection map—Specifies to use the default SIP map.
• Select a SIP map for fine control over inspection—Lets you select a defined application
inspection map or add a new one.
• Add—Opens the Add Policy Map dialog box for the inspection.
• TLS Proxy—Lets you specify TLS proxy settings for the inspect map.
–
Use TLS Proxy to enable inspection of encrypted traffic—Specifies to use Transaction Layer
Security Proxy to enable inspection of encryped traffic.
TLS Proxy Name:—Name of existing TLS Proxy.
New—Opens the Add TLS Proxy dialog box to add a TLS Proxy.
Modes
The following table shows the modes in which this feature is available:
Select SNMP Map
The Select SNMP Map dialog box lets you select or create a new SNMP map. An SNMP map lets you
change the configuration values used for SNMP application inspection. The Select SNMP Map table
provides a list of previously configured maps that you can select for application inspection.
Fields
• Use the default SNMP inspection map—Specifies to use the default SNMP map.
• Select an SNMP map for fine control over inspection—Lets you select a defined application
inspection map or add a new one.
• Add—Opens the Add Policy Map dialog box for the inspection.
Modes
The following table shows the modes in which this feature is available:
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
• • • •—
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
• • • •—