Filter
Top Products
5-2
Cisco ASDM User Guide
OL-16647-01
Chapter 5 Using the Startup Wizard
Startup Wizard Screens for ASA 5500 Series and PIX 500 Series Security Appliances
Startup Wizard Screens for ASA 5500 Series and PIX 500 Series
Security Appliances
Table 5-1 lists all of the required Startup Wizard screens for configuring the ASA 5500 series adaptive
security appliances and PIX 500 series security appliances only. The actual sequence of screens is
determined by your specified configuration selections. The sequence shown applies only to the ASA
5505 adaptive security appliance. The Availability columns lists the mode or modes in which each screen
appears and provides additional configuration information. Click the name to view information for the
selected screen.
Startup Wizard Screens for the ASA 5505 Adaptive Security
Appliance
Table 5-2 lists all of the required Startup Wizard screens for configuring the ASA 5505 adaptive security
appliance only. The sequence of screens listed represents configuration for the single, routed mode. The
Availability columns lists the mode or modes in which each screen appears and provides additional
configuration information. Click the name to view information for the selected screen.
Table 5-1 Startup Wizard Screens for ASA 5500 Series and PIX 500 Series Security Appliances
Screen Name Availability
Step 1 - Starting Point or Welcome, page 5-3 All modes. The factory default option in Step 1 is
not available on the PIX security appliance.
Step 2 - Basic Configuration, page 5-4
Step 3 - Auto Update Server, page 5-5 Single, routed and transparent modes. If enabled in
single transparent mode, the Interface
Configuration and Step 13 - DHCP Server screens
are not available.
Step 4 - Management IP Address Configuration,
page 5-6
Single, transparent mode only.
Outside Interface Configuration, page 5-22 Single, routed mode only.
Outside Interface Configuration - PPPoE,
page 5-21
Interface Configuration, page 5-20 Single, transparent mode only.
Other Interfaces Configuration, page 5-19 All modes.
Step 12 - Static Routes, page 5-13
Step 13 - DHCP Server, page 5-13
Step 14 - Address Translation (NAT/PAT),
page 5-14
Single, routed mode only.
Step 15 - Administrative Access, page 5-15 All modes.
Step 17 - Startup Wizard Summary, page 5-19