Filter
Top Products
24-34
Cisco ASDM User Guide
OL-16647-01
Chapter 24 Configuring Application Layer Protocol Inspection
Service Policy Field Descriptions
Modes
The following table shows the modes in which this feature is available:
Select HTTP Map
The Select HTTP Map dialog box lets you select or create a new HTTP map. An HTTP map lets you
change the configuration values used for HTTP application inspection. The Select HTTP Map table
provides a list of previously configured maps that you can select for application inspection.
Fields
• Use the default HTTP inspection map—Specifies to use the default HTTP map.
• Select an HTTP map for fine control over inspection—Lets you select a defined application
inspection map or add a new one.
• Add—Opens the Add Policy Map dialog box for the inspection.
Modes
The following table shows the modes in which this feature is available:
Select IM Map
The Select IM Map dialog box lets you select or create a new IM map. An IM map lets you change the
configuration values used for IM application inspection. The Select IM Map table provides a list of
previously configured maps that you can select for application inspection.
Fields
• Add—Opens the Add Policy Map dialog box for the inspection.
Modes
The following table shows the modes in which this feature is available:
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
• • • •—
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
• • • •—