Filter
Top Products
5-16
Cisco ASDM User Guide
OL-16647-01
Chapter 5 Using the Startup Wizard
Startup Wizard Screens for the ASA 5505 Adaptive Security Appliance
• Interface—Displays the host or network name.
• IP Address—Displays the IP address of the host or network.
• Mask—Displays the subnet mask of the host or network.
• Enable HTTP server for HTTPS/ASDM access—Check this check box to enable a secure
connection to an HTTP server to access ASDM.
• Add—Click to add the access type, an interface, and then specifies the IP address and netmask of
the host network that may connect to that interface for management purposes only. See Add/Edit
Administrative Access Entry for more information.
• Edit—Changes an interface. See Add/Edit Administrative Access Entry for more information.
• Delete—Removes an interface.
• Enable ASDM history metrics—Check this check box to allow ASDM to collect and display
statistics.
For More Information
See the Cisco ASA 5500 Series Adaptive Security Appliance Getting Started Guide and the Cisco ASA
5505 Getting Started Guide.
Modes
The following table shows the modes in which this feature is available:
Add/Edit Administrative Access Entry
This dialog box let you configure the hosts. To access this feature from the main ASDM application
window, choose one of the following:
• Configuration > Properties > Device Access > HTTPS/ASDM
• Configuration > Properties > Device Access > Telnet
• Configuration > Properties > Device Access > SSH
• Configuration > Properties > History Metrics
Fields
• Access Type—Choose one of the following types of preconfigured connections for the CLI console
sessions from the drop-down list:
–
ASDM/HTTPS
–
SSH
–
Telnet
Note ASDM uses HTTP over SSL for all communication with the security appliance.
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
• • • •—