Filter
Top Products
24-104
Cisco ASDM User Guide
OL-16647-01
Chapter 24 Configuring Application Layer Protocol Inspection
Inspect Map Field Descriptions
Add/Edit Instant Messaging (IM) Policy Map
The Add/Edit Instant Messaging (IM) Policy Map pane lets you configure the security level and
additional settings for IM application inspection maps.
Fields
• Name—When adding an IM map, enter the name of the IM map. When editing an IM map, the name
of the previously configured IM map is shown.
• Description—Enter the description of the IM map, up to 200 characters in length.
• Match Type—Shows the match type, which can be a positive or negative match.
• Criterion—Shows the criterion of the IM inspection.
• Value—Shows the value to match in the IM inspection.
• Action—Shows the action if the match condition is met.
• Log—Shows the log state.
• Add—Opens the Add IM Inspect dialog box to add an IM inspection.
• Edit—Opens the Edit IM Inspect dialog box to edit an IM inspection.
• Delete—Deletes an IM inspection.
• Move Up—Moves an inspection up in the list.
• Move Down—Moves an inspection down in the list.
Modes
The following table shows the modes in which this feature is available:
Add/Edit IM Map
The Add/Edit IM Inspect dialog box lets you define the match criterion and value for the IM inspect map.
Fields
• Single Match—Specifies that the IM inspect has only one match statement.
• Match Type—Specifies whether traffic should match or not match the values.
For example, if No Match is selected on the string “example.com,” then any traffic that contains
“example.com” is excluded from the class map.
• Criterion—Specifies which criterion of IM traffic to match.
–
Protocol—Match IM protocols.
–
Service—Match IM services.
–
Source IP Address—Match source IP address.
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
• • • •—