Filter
Top Products
24-108
Cisco ASDM User Guide
OL-16647-01
Chapter 24 Configuring Application Layer Protocol Inspection
Inspect Map Field Descriptions
AH idle timeout: 00:00:30.
–
Default Level—Sets the security level back to the default level of Low.
• Details—Shows additional parameter settings to configure.
Mode
The following table shows the modes in which this feature is available:
Add/Edit IPSec Pass Thru Policy Map (Details)
The Add/Edit IPSec Pass Thru Policy Map pane lets you configure the security level and additional
settings for IPSec Pass Thru application inspection maps.
Fields
• Name—When adding an IPSec Pass Thru map, enter the name of the IPSec Pass Thru map. When
editing an IPSec Pass Thru map, the name of the previously configured IPSec Pass Thru map is
shown.
• Description—Enter the description of the IPSec Pass Through map, up to 200 characters in length.
• Security Level—Shows the security level settings to configure.
• Parameters—Configures ESP and AH parameter settings.
–
Limit ESP flows per client—Limits ESP flows per client.
Maximum—Specify maximum limit.
–
Apply ESP idle timeout—Applies ESP idle timeout.
Timeout—Specify timeout.
–
Limit AH flows per client—Limits AH flows per client.
Maximum—Specify maximum limit.
–
Apply AH idle timeout—Applies AH idle timeout.
Timeout—Specify timeout.
Modes
The following table shows the modes in which this feature is available:
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
• • • •—
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
• • • •—