Filter
Top Products
29-4
Cisco ASDM User Guide
OL-16647-01
Chapter 29 Configuring Trend Micro Content Security
Managing the CSC SSM
• The management port of the adaptive security appliance is connected to the management network.
To allow management of the adaptive security appliance and the CSC SSM, hosts running ASDM
must be connected to the management network.
• The management network includes an SMTP server for e-mail notifications for the CSC SSM and a
syslog server to which the CSC SSM can send system log messages.
Figure 29-2 CSC SSM Deployment with a Management Network
Getting Started with the CSC SSM
Before you receive the security benefits that by a CSC SSM provides, you must perform several steps in
addition to SSM hardware installation.
To configure the adaptive security appliance and the CSC SSM, perform the following steps:
Step 1 If the CSC SSM was not pre-installed in a Cisco ASA 5500 series adaptive security appliance, install the
CSC SSM and connect a network cable to the SSM management port. For assistance with SSM
installation and connection, see the Cisco ASA 5500 Series Adaptive Security Appliance Getting Started
Guide.
The CSC SSM management port must be connected to your network to allow management of and
automatic updates to the CSC SSM software. Additionally, the CSC SSM uses the management port for
e-mail notifications and syslog message generation.
Step 2 With the CSC SSM, you received a Product Authorization Key (PAK). Use the PAK to register the CSC
SSM at the following URL:
http://www.cisco.com/go/license
After you register, you will receive activation keys by e-mail. The activation keys are required before
you can complete Step 5.
Step 3 Obtain the following information, for use in Step 5.
148387
192.168.100.1
192.168.50.1
Notifications
SMTP Server
192.168.50.38
SSM
management
port
10.6.13.67
Trend Micro
Update Server
Security
Appliance
Main System
inside
CSC SSM
outside
HTTP
Proxy
management port
ASDM
Syslog
Internet