Filter
Top Products
1-19
Cisco ASDM User Guide
OL-16647-01
Chapter 1 Welcome to ASDM
Home Pane
VPN Peers—Display only. Shows the number of VPN peers allowed. This entry is blank if no
VPN peers are supported.
Clientless SSL VPN Peers—Display only. Shows the number of clientless SSL VPN peers
allowed.
• VPN Tunnels Status—Routed, single mode only. Shows the following information:
–
IKE—Display only. Shows the number of connected IKE tunnels.
–
IPSec—Display only. Shows the number of connected IPSec tunnels.
–
Clientless SSL VPN—Display only. Shows the number of clientless, connected SSL VPN
tunnels.
–
SSL VPN Client—Display only. Shows the number of connected SSL VPN client tunnels.
• System Resources Status—Shows the following CPU and memory usage statistics:
–
CPU—Display only. Shows the current percentage of CPU being used.
–
CPU Usage (percent)—Display only. Shows the CPU usage for the last five minutes.
–
Memory—Display only. Shows the current amount of memory being used in MB.
–
Memory Usage (MB)—Display only. Shows the memory usage for the last five minutes in MB.
• Interface Status—Shows the status of each interface. If you select an interface row, the input and
output throughput in Kbps shows under the table.
–
Interface—Display only. Shows the interface name.
–
IP Address/Mask—Display only. Routed mode only. Shows the IP address and subnet mask of
the interface.
–
Line—Display only. Shows the administrative status of the interface. A red icon is displayed if
the line is down, and a green icon is displayed if the line is up.
–
Link—Display only. Shows the link status of the interface. A red icon is displayed if the link is
down, and a green icon is displayed if the link is up.
–
Kbps—Display only. Shows the current number of throughput in Kbps that cross the interface.
• Traffic Status—Shows graphs for connections per second for all interfaces and for the traffic
throughput of the lowest security interface.
–
Connections per Second Usage—Display only. Shows the UDP and TCP connections per
second during the last five minutes. This graph also shows the current number of connections
by type, UDP, TCP, and the total.
–
Name Interface Traffic Usage (Kbps)—Display only. Shows the traffic throughput for the lowest
security interface. If you have multiple interfaces at the same level, then ASDM shows the first
interface alphabetically. This graph also shows the current throughput by type, input Kbps, and
output Kbps.
• Latest ASDM Syslog Messages—Shows the latest system messages generated by the adaptive
security appliance.
–
Stop Message Display—Stops logging to ASDM.
–
Resume Message Display—Continues logging to ASDM.
–
Configure ASDM Filters—Configures logging filters.
Modes
The following table shows the modes in which this feature is available: