Filter
Top Products
46-10
Cisco ASDM User Guide
OL-16647-01
Chapter 46 Monitoring Failover
Monitoring Failover in the System Execution Space
–
xmit—Number of transmitted packets to the other unit
–
xerr—Number of errors that occurred while transmitting packets to the other unit
–
rcv—Number of received packets
–
rerr—Number of errors that occurred while receiving packets from the other unit
The following are the stateful object field types:
–
General—Sum of all stateful objects.
–
sys cmd—Logical update system commands; for example, LOGIN and Stay Alive.
–
up time—Up time, which the active unit passes to the standby unit.
–
RPC services—Remote Procedure Call connection information.
–
TCP conn—TCP connection information.
–
UDP conn—Dynamic UDP connection information.
–
ARP tbl—Dynamic ARP table information.
–
L2BRIDGE tbl—Layer 2 bridge table information (transparent firewall mode only).
–
Xlate_Timeout—Indicates connection translation timeout information.
–
IKE upd—IKE connection information.
–
VPN IPSEC upd—IPSec connection information.
–
VPN CTCP upd—cTCP tunnel connection information.
–
VPN SDI upd—SDI AAA connection information.
–
VPN DHCP upd—Tunneled DHCP connection information.
• Logical Update Queue Information—Displays the following statistics:
–
Recv Q—The status of the receive queue.
–
Xmit Q—The status of the transmit queue.
The following information is displayed for each queue:
–
Cur—The current number of packets in the queue.
–
Max—The maximum number of packets.
–
Total—The total number of packets.
You can performthe following actions from this pane:
• Make Active—Click this button to make the failover group active unit on the security appliance.
• Make Standby—Click this button to force the failover group into the standby state on the security
appliance.
• Reset Failover—Click this button to reset a system from the failed state to the standby state. You
cannot reset a system to the active state. Clicking this button on the active unit resets the standby
unit.
• Refresh—Click this button to refresh the status information in the Failover state of the system field.
Modes
The following table shows the modes in which this feature is available: