24-90
Cisco ASDM User Guide
OL-16647-01
Chapter 24 Configuring Application Layer Protocol Inspection
Inspect Map Field Descriptions
Limit payload to audio or video, based on the signaling exchange: no
–
High
State Checking h225 Enabled
State Checking ras Enabled
Call Party Number Enabled
Call duration Limit 1:00:00
RTP conformance enforced
Limit payload to audio or video, based on the signaling exchange: yes
–
Phone Number Filtering—Opens the Phone Number Filtering dialog box to configure phone
number filters.
–
Customize—Opens the Add/Edit H.323 Policy Map dialog box for additional settings.
–
Default Level—Sets the security level back to the default level of Medium.
Modes
The following table shows the modes in which this feature is available:
Phone Number Filtering
The Phone Number Filtering dialog box lets you configure the settings for a phone number filter.
Fields
• Match Type—Shows the match type, which can be a positive or negative match.
• Criterion—Shows the criterion of the inspection.
• Value—Shows the value to match in the inspection.
• Action—Shows the action if the match condition is met.
• Log—Shows the log state.
• Add—Opens the Add Phone Number Filter dialog box to add a phone number filter.
• Edit—Opens the Edit Phone Number Filter dialog box to edit a phone number filter.
• Delete—Deletes a phone number filter.
• Move Up—Moves an entry up in the list.
• Move Down—Moves an entry down in the list.
Modes
The following table shows the modes in which this feature is available:
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
• • • •—