Filter
Top Products
11-27
Cisco ASDM User Guide
OL-16647-01
Chapter 11 Configuring Dynamic And Static Routing
Dynamic Routing
Redistribution
The Redistribution pane displays the routes that are being redistributed from other routing processes into
the RIP routing process.
Fields
• Protocol—(Display only) Displays the routing protocol being redistributed into the RIP routing
process:
–
Static—Static routes.
–
Connected—Directly connected networks.
–
OSPF—Networks discovered by the specified OSPF routing process.
–
EIGRP—Networks discovered by the specified EIGRP routing process.
• Metric—The RIP metric being applied to the redistributed routes.
• Match—(Display only) Displays the type of OSPF routes being redistributed into the RIP routing
process. If the Match column is blank for an OSPF redistribution rule, Internal, External 1, and
External 2 routes are redistributed into the RIP routing process.
• Route Map—(Display only) Displays the name of the route map, if any, being applied to the
redistribution. Route maps are used to specify with greater detail which routes from the specified
routing process are redistributed into RIP.
Modes
The following table shows the modes in which this feature is available:
Add/Edit Route Redistribution
Use the Add Route Redistribution dialog box to add a new redistribution rule. Use the Edit Route
Redistribution dialog box to change an existing rule.
Fields
• Protocol—Choose the routing protocol to redistribute into the RIP routing process:
–
Static—Static routes.
–
Connected—Directly connected networks.
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
• — • ——
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
• — • ——