Filter
Top Products
29-9
Cisco ASDM User Guide
OL-16647-01
Chapter 29 Configuring Trend Micro Content Security
CSC SSM Setup
• If CSC card fails—Configures the action to take if the CSC SSM becomes inoperable.
–
Permit traffic—Allows traffic if the CSC SSM fails.
–
Close traffic—Blocks traffic if the CSC SSM fails.
Modes
The following table shows the modes in which this feature is available:
For More Information
See Managing the CSC SSM, page 29-2
CSC SSM Setup
The screens under CSC Setup let you configure basic operational parameters for the CSC SSM. You must
complete the CSC Setup Wizard at least once before you can configure each screen separately. After you
complete the CSC Setup Wizard, you can modify each screen individually without using this wizard
again.
Additionally, you cannot access the panes under Home > Trend Micro Content Security > Content
Security Tab or Monitoring > Trend Micro Content Security > Content Security Tab until you complete
the CSC Setup Wizard. If you try to access these panes before completing this wizard, a dialog box
appears and lets you access the wizard directly to complete the configuration.
For an introduction to the CSC SSM, see About the CSC SSM, page 29-2. For more information, see the
following topics:
• Activation/License, page 29-10
• IP Configuration, page 29-11
• Host/Notification Settings, page 29-11
• Management Access Host/Networks, page 29-12
• Password, page 29-13
• Restoring the Default Password, page 29-14
• Wizard Setup, page 29-15
Modes
The following table shows the modes in which this feature is available:
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
• • • •—